NightPorter - Front Door Paging System
The next generation in Front Door paging systems. The transmitter can be interfaced with Front Door and Reception Bell, Disabled Rooms, Night Phone and Fire Alarm panels, giving you a total communication package for those sites that do not warrant a standard paging solution package.
Used in hundreds of lodge type applications, Nightporter offers you a premium communication solution at a very competitive price.
Hospitality After Hours
Features & Benefits
| Increase... |
Improve... |
|
Allows Night Porter to move around the building knowing that he is in direct contact with anyone that requires assistance
Decrease....
- Guests waiting at the front door unable to gain access
- Your Night Porter being unable to hear door bell or phone ringing
- Missed revenue opportunies
|
- Revenue
- Guest Satisfaction
- Multi task personnel
|
ANK23 (J23) Alphanumeric Pager
Simple, compact and discreet personal device for short messages
- 2 Lines of 18 alphanumeric characters
- 10 to 60 message memory
- Unread message indication
- POCSAG, FLEXTM Signal format
- Backlight
- AAA Type battery power
- Addresses: 6
- 30 day Battery Life without switching off
- Programming: PC programming, Manual programming
- Operates on UHF Frequency
- Durable, rugged and reliable
- Small size, lightweight and comfortable to wear
- Can be clipped to the belt or waistband
- Protective case
- Dimensions: 75 x 51 x 18 mm
- Weight: 65g including battery
UHF Night Porter Transmitter Features
- Power Supply: +11.5 V to 15.2 V nom 13.8V (Others Available)
- RF Frequency: 450-470 MHz
- Channel Spacing: 25 KHz
- Output Power: 2 Watts +/- 1 dB 50
- Power Consumption : Standby : 45mA Low power standby - 15mA : Transmit : 1.0A approx
- Modulation: Carrier FSK with NRZ data
- Deviation: +/-4.5KHz
- Baud Rate: 512/1200/1600/2400Baud
- Message Format: POCSAG
- Spurious Outputs: -30Bm or less
- erial input/output: RS 232 ( DCE ), 1200-9600 baud no parity,8 data bits,1 stop bit
- Serial Paging Command Protocols: SALCOM proprietary,PET ( PG 1 ) GPS (NMEA$GPGGA)
- Discrete Inputs: Pulled up to +12V (47K),ground to activate
- Discrete Outputs: +12V on P5 pin 1 ( 200mA max). : +12V switched P5 pin 9 ( 200mA max ) : PTT & Data on P7 pins 5 and 9. : (20mA sink with 47K pull-up to 5V
- Case Dimensions: 140 x 105 x 32mm
PageCall Unit
- The 11-85 is a UHF low power POCSAG paging transmitter with an in-built encoder. The buttons initiate transmissions to provide numeric, alpha-numeric and tone-only POCSAG paging, enabling a user to call a pager (approximately 2,000,000 codes), append a priority level (1 of 4), and add a numeric or alpha- numeric message.
- In addition to the front panel buttons, four discrete inputs are supported with unique pre-programmed messages on low input transition. Provision to transmit a message more than once is catered for and the time between transmissions is programmable.
- 'Beep' Indicator: Audible 'beeps' accompany each key-push and all successful transmissions. There are different beeps for an 'out of lock' transmission failure and a distinctive beep for low battery accompanies each transmission.
- Aerial: The 11-85 has an fixed external quarter wave helical aerial
